Hypertherm Powermax 1250

The Hypertherm Powermax1250 has technology improvements in the power supply and cutting torch that provide faster, more economical cuts than any other plasma cutting system available. In fact it cuts 1-inch mild steel material 80% faster on  mild steel than any competitor machine tested. The digitally controlled inverter design delivers continuously adjustable 25 - 80 amps of output power to the provide power needed to perform quick, clean cuts over a varying range of work piece thickness. The new gouge setting provides fast removal of metal and is easier to operate because of the improved arc transfer. Patented HYLife electrodes give the Powermax 1250 the longest consumable life in the industry. Fast connect and disconnect for the torch and the Powermax 1250 is perfect for CNC systems. The Hypertherm 1250 can usually be found at stores for $3770.00 but buying plasma cutters on EBay lets you can find one and save $100's on the purchase. Buy with confidence, and convenience, use the security of PayPal and EBay.

Input voltage: 200 - 600 V, 1/3-PH, 50/60 Hz
Input current: 70 A @ 200V 1PH, 41 A @ 200V 3PH
Output current: 25 - 80 A
Duty cycle: 50% @ 80 A, 240 V, 1 - PH
Gas supply: Clean, dry, oil-free air or nitrogen 90 psi @ 6.7cfm

Cut capacity

Recommended: 7/8"
Maximum: 1 1/8"
Sever: 1 1/2"

About · Contact · Privacy · Site Map · FAQ · Site Admin · Log Off ·

%%BLOGLINK%% is a post from: Plasma Cutters